Skip to main content

Areas Configuration

Adding area configuration

P
Written by Peter
Updated over a year ago

Area configuration is necessary when planning orders. By adding area configuration the planning stage is simplified. A set area can later be used as an order filter in the planning phase.

Accessing the settings screen

  • Configuration window can be accessed by pressing the User icon at the top-right of the screen, and select System settings:

  • When pressing on it, new window will pop up - select Configuration:

  • Press Areas:

  • New area can be added by pressing on Add area;

Drawing a new area

  • A map will open up where the area can be drawn. Firstly, write the area name:

  • To draw the area select the drawing tool and start drawing the area needed:

  • When finished drawing press on finish. If a mistake occurred the last point can be deleted or edited:

  • After drawing the area, press on Add Area. The new area will appear in the existing area list;

Selecting from preset areas

  • There is an option to choose from Preset Areas (usually the preset areas are the states), click on Preset Areas and choose an area from the drop down list:

  • After pressing on the preset area, it will appear on the map:

  • Press Add Area - it will be added and saved. The area will appear in the list of existing areas.

Did this answer your question?